Skip to main content

5 minute read

How to do due diligence without slowing your team down

Due diligence has a reputation for slowing things down.

A new supplier looks promising, but someone needs to check them first. A potential partner lands on your desk, but before the conversation goes any further, you need to understand who you're actually dealing with. An acquisition target, prospect or service provider looks good on paper, but does the picture hold up when you look beneath the surface?

The instinct is often to research everything.

That sounds thorough. In practice, it can create a different problem: hours of searching, dozens of tabs, duplicated work and a growing pile of information without much more clarity.

Good due diligence isn't about knowing everything before you move. It's about knowing what you need to know at this stage of the decision.

After two decades of diligence work, one principle comes up again and again: the best research reduces uncertainty. It doesn't simply increase the amount of information available.

Here's how to apply that principle.

1. Start with the decision, not the search

Before researching a company, ask one simple question:

What decision are we trying to make?

Are you deciding whether to:

  • invite a supplier into an RFP?
  • take a first meeting?
  • progress a potential partnership?
  • shortlist an acquisition target?
  • sign a contract?
  • onboard a critical third party?
  • commit significant capital?

These aren't the same decision. They shouldn't require the same level of diligence.

One of the easiest ways to waste time is to begin researching without defining what the research needs to establish.

At an early stage, you may simply need enough confidence to decide whether a company is worth progressing.

Later, once money, contracts, data, reputation or operational dependency are on the line, the threshold should become much higher.

Think of diligence as a funnel rather than a gate.

  • Early stage: Is there anything here that should stop us progressing?
  • Middle stage: What do we need to understand before committing further?
  • Final stage: What needs to be verified before we make the decision?

The deeper the commitment, the deeper the diligence.

2. Validate the basics early

You don't need to investigate everything immediately. But there are some fundamentals worth establishing early because problems here can change the entire direction of your research.

Are you looking at the right company?

It sounds obvious. It isn't always.

Trading names, subsidiaries, parent companies, similarly named businesses and international entities can make company identity surprisingly messy.

Before drawing conclusions, establish which legal entity or business you're actually assessing and how it relates to the organisation you think you're dealing with.

Otherwise, perfectly good research can produce a perfectly wrong answer.

Does the business make sense?

Try to explain, in plain English:

What does this company actually do? What does it sell? Who buys it? Where does it operate? How does it appear to make money?

If you have spent 20 minutes researching a business and still can't answer those questions clearly, that's useful information in itself.

Complexity isn't automatically a problem. Lack of clarity can be.

Who owns and controls it?

Understanding ownership provides context for almost everything else.

Is the company founder-owned? Private equity backed? Publicly listed? Part of a larger group? Recently acquired?

Ownership can affect financial support, governance, decision-making, reputation and the people ultimately behind the business.

It can also reveal that the company you're assessing is only one small part of a much bigger picture.

Are there obvious signals worth investigating?

At this stage, you're not trying to prove that a company is "safe". You're looking for reasons to ask another question.

That might include:

  • significant litigation or regulatory action
  • sudden leadership changes
  • unusual ownership structures
  • major layoffs or rapid expansion
  • financial distress signals
  • conflicting information about the business
  • significant negative media
  • cybersecurity or data incidents
  • a history that doesn't quite match the company's current story

A signal is not automatically a problem. It's a reason to look closer.

3. Separate facts, claims and signals

This is one of the most useful habits in company research.

Not everything you find has the same evidential value. Consider these three statements:

  • The company says it serves more than 5,000 customers.
  • A regulatory filing confirms revenue of $50 million.
  • Employee numbers appear to have fallen significantly over the past year.

All three may matter. But they're different kinds of information.

The first is a company claim. The second is a verifiable fact from a primary source. The third is a signal that may require interpretation.

Treating them as equivalent creates false confidence.

A company's website is an excellent source for understanding how the company describes itself. It isn't necessarily independent evidence that those claims are true.

Likewise, a news article repeating another news article doesn't become stronger evidence simply because the same claim now appears in ten search results.

Always ask: Where did this information originate?

And, just as importantly: How much confidence should I place in it?

4. Follow the signal. Don't boil the ocean

One of the biggest differences between efficient research and slow research is knowing when to go deeper.

Imagine you discover that a company's CEO changed three months ago. You could immediately research every executive, director and board member. Or you could first ask:

Does this change matter?

Perhaps the founder retired after 20 successful years and an established internal successor took over. Probably useful context, but perhaps nothing more.

Alternatively, the CEO may be the third senior executive to leave in six months, alongside falling headcount and reports of financial pressure.

Now you have a pattern.

That's where deeper investigation earns its time. Good diligence is often signal-led.

Start broad enough to understand the company. Identify the areas that could materially affect your decision. Then spend your time there.

The objective isn't maximum coverage. It's maximum relevance.

5. Don't mistake absence of information for absence of risk

This is a particularly dangerous shortcut.

You search for adverse information. Nothing obvious appears. The company must be fine.

Unfortunately, it doesn't work that way.

Public information varies enormously between companies, industries and jurisdictions. Private businesses may disclose very little. Corporate records may be fragmented. Relevant information may sit in registries, filings or regulatory databases rather than appearing prominently in search results.

Sometimes the correct conclusion isn't: "No issues identified."

It's: "We don't currently have enough evidence to reach a conclusion."

Those are very different statements. Knowing what you don't know is part of good diligence.

6. Look for contradictions, not just red flags

Diligence is often framed as a hunt for bad news.

That's too narrow, as some of the most useful findings aren't dramatic red flags. They're inconsistencies.

  • A company describes itself as global, but appears to have a very limited operating footprint.
  • It promotes decades of experience, but the legal entity was incorporated recently.
  • It announces rapid expansion while public hiring activity appears to be contracting.
  • Its website lists an executive who appears to have left months ago.

None of these observations automatically means something is wrong.

But they create questions. And questions are valuable.

The purpose of research isn't to pass judgement from a distance. It's to make the next conversation smarter.

7. Know what can wait

Not every unanswered question needs answering immediately.

This is where teams can lose enormous amounts of time.

If you're deciding whether to take an introductory meeting with a potential partner, you probably don't need the same depth of review you'd require immediately before signing a major contract.

If you're screening 50 potential suppliers, conducting full diligence on all 50 before creating a shortlist would be expensive and unnecessary.

A useful question is: Would knowing this answer change what we do next?

If yes, investigate it.

If no, ask whether it can wait until the company progresses further.

You can think about research in three buckets:

  • Need to know nowInformation that could change the immediate decision.
  • Need to know laterImportant questions that become relevant if the relationship progresses.
  • Interesting to knowContext that may be useful but doesn't materially affect the decision.

The third bucket is where research time quietly disappears.

8. Avoid the copy‑and‑paste diligence problem

There is another source of inefficiency that has little to do with how much research you perform. It's inconsistency.

Give five people the same company to research and you may receive five completely different outputs.

One person starts with financials. Another checks media coverage. Someone else spends most of their time on leadership. A fourth focuses heavily on the company website.

Individual judgement is valuable. But when the underlying research process changes every time, important areas can be missed and comparisons become difficult.

A repeatable structure helps.

For an initial company assessment, that might mean consistently considering:

  • company identity and business model
  • ownership and corporate structure
  • leadership
  • products and services
  • market position
  • financial and commercial signals
  • legal and regulatory signals
  • media and reputation
  • material watchpoints
  • questions requiring further investigation

The exact depth can change, but the discipline shouldn't.

9. Finish with questions, not just findings

Research becomes valuable when somebody can use it.

A 30-page document containing everything you found may demonstrate effort. It doesn't necessarily make the next decision easier.

A useful diligence output should leave the reader able to answer:

  • What do we know?
  • What don't we know?
  • What matters?
  • What should we ask next?

That last question is particularly important.

If you've identified customer concentration, ask about dependency on major accounts. If ownership has recently changed, understand what changed with it. If there has been senior leadership turnover, ask why. If public information about security practices is limited and the company will handle sensitive data, make that part of the next stage of review.

The output of good diligence isn't simply information. It's a better next question.

Faster doesn't have to mean shallower

There is a false choice in company research: move quickly and accept less confidence, or be thorough and accept that everything will take longer.

Good diligence sits between the two.

Structure the initial review. Prioritise authoritative evidence. Separate facts from claims and signals. Follow material findings rather than every possible research path. Record what remains unknown. Increase the depth of investigation as the significance of the decision increases.

And above all, know when you have enough information to make the next decision.

Because the objective of diligence isn't to slow a business down. It's to help it move forward with its eyes open.